Cargo Securement Standards

Written by  Super User

In order to be compliant with regulations, drivers and motor carriers must ensure that their cargo securement devices and systems meet the required performance standards. All devices and systems used to secure cargo must be capable of meeting the requirements of §393.102 which addresses protection against shifting and falling cargo.  Steel strapping, cord strapping and other cargo tie downs used to secure cargo must be installed and maintained to ensure that maximum forces acting on the devices do not exceed the manufacturers breaking strength.

Cargo tie downs and securing devices must not contain knots. If a tie down is repaired, it must be repaired in accordance with the manufacturer’s instructions. Each tie down must be attached and secured in a manner that prevents it from becoming loose, unfastening, opening or releasing while the vehicle is in transit. Edge protection must be used whenever a cargo tie down would be subject to abrasion or cutting at the point where it touches an article of cargo. The edge protection must resist abrasion, cutting and crushing.

There are exceptions to the above guidelines. These requirements do not apply to vehicles transporting one or more articles of cargo such as, but not limited to, machinery or fabricated structural items such as steel or concrete beams, cranes, booms, girders, and trusses, which because of their design, size, shape, or weight, must be fastened by special methods.

For cargo securement that offers maximum impact resistance, high joint strength and maintains tension over time contact Redback Industries. To discuss the strength and tension of a particular product and determine which strapping solution is right for you, contact Redback Industries at 1.866.455.1345 or visit our site at www.redback.com

Leave a comment

Make sure you enter all the required information, indicated by an asterisk (*). HTML code is not allowed.

Post comment as a guest

comment

  • K2_NO_COMMENTS