Without a doubt, when it comes to shipping cargo, steel banding offers some distinct disadvantages over composite strapping, woven polyester strapping, and cargo lashing.  Some of these disadvantages include:

Potential Damage to Cargo:

Steel banding has the potential to rust and in turn, stain any cargo that this banding touches.  Further, as the steel banding can also tear and/or scratch cargo, this type of banding is inappropriate to use on certain surfaces.

Potential for Serious Injuries:

If a steel band is cut from a bundle in a careless manner, the steel band most likely will lash and cause deep bounds.  In addition, since steel banding coil weigh so much when compared to other banding materials, many people also get injured from loading these coils into a dispenser.

High Cost:

Without a doubt, steel banding is definitely a costly choice.  Further, as the price of steel tends to change according to the markets, budgeting for this type of banding is next to impossible.

Other Problems:

Since steel banding does not stretch after it has been attached to bundles, there is a potential for significant load securement problems.  If the cargo settles for instance and becomes smaller, the steel banding will remain the same size, and in turn, will no longer hold the cargo in a secure manner.  This situation can cause potential problems as the cargo now has the shift and cause accidents in turn.

The Alternative

Fortunately, Redback Industries can provide alternatives to steel banding for a competitive price.  Specifically, Redback Industries offers non metal strapping, and cargo lashing for cargo securement.  Find out how Redback Industries can help you secure your cargo at www.redbackindustries.com.

According to the 2006 federal Large Truck Crash Causation Study (LTCCS), there are a number of different factors that contribute to truck accidents. However, while there are a number of different factors involved in these types of accidents, the LTCCS notes that the following factors contribute to the majority of truck accidents:

Truck Cargo Shift – when an improperly secured cargo load on a truck shifts, serious accidents can occur.

Truck Driver Training – while many truckers receive proper training, there are cases where inadequate driver experience and training plays a major role in trucks accidents.

Truck Manufacture– if there is a mechanical fault within a truck, an accident can occur.

Traffic Signalling and/or Highway Conditions – both faulty signalling and inadequate highway infrastructure can contribute to truck accidents.

Weather Conditions – unfavourable conditions that include blizzards, rain storms, freezing rain, fog and other poor environmental conditions can contribute to truck accidents

Secure Your Truck Load Properly

While many factors do contribute to truck accidents, one way to avoid such accidents and/or to minimize damage if involved with an unavoidable accident is to ensure that a truck’s pallet loads are properly secured.  One excellent way to promote safety is to make use of a steel banding alternative that will ensure the cargo securement of these bundles.

For instance, Redback Industries specialises in non-metal straps that are impact resistant and maintain both their strength and tension over time.  Ideal for both irregular and heavy loads, the woven polyester cord strap, the composite cordstrap, and lashing systems all provide excellent support.

To conclude then, in order to minimize the damage caused in truck accidents or to avoid these types of accidents altogether, it is vital that bundles on trucks are properly secured on pallets with the proper straps.  To find out how Redback Industries can help your business with load securement, visit www.redbackindustries.com, or call us at 1.866.455.1345.

Steel strapping is available in a variety of widths and thicknesses as well as variations in the grade of steel. Steel is used where minimal stretch is desired. Surface finishes for steel strap include: paint, paint and wax, bluing or zinc and wax. The wax is used to better transmit the tension around the bundle and for use with certain types of tensioners. Common applications include steel coils, bundles of metal, baling wire, bricks and pavers, and roll end-binding.

Unfortunately, there have been numerous accidents over the last few years and with the cost of steel strapping continuing to rise, it is time to replace steel banding with a superior and safer alternative.

Polypropylene strap (oriented or tensilized), also known as poly strapping,  is an economical material designed for light to medium duty unitizing, palletizing and bundling. It is available in various widths, thicknesses, and polymer variations (e.g., copolymers). Some polypropylene is embossed or printed.

This product offers high elongation at break but tends to have irrecoverable dead stretch with constant stress. What is not generally known to end users is that polypropylene strapping will lose about 50% of the applied tension within one hour, and that this tension loss is accelerated with increases in ambient temperature, consequently although suitable for packs with a degree of stored energy that will take up any relaxation that occurs in the strap, unacceptable strap slackness may occur after time if used on product that is ‘Solid’ such as bricks or concrete. Furthermore, polypropylene strapping is susceptible to UV degradation and can quickly degrade if left outside exposed to the elements.

Oriented or tensilized polyester and nylon strapping are stronger than polypropylene and are used as an alternative to steel strapping in the some industries.  Polyester provides excellent retained tension on rigid loads.  Its excellent recovery properties can help a load absorb impact without strap breakage, however polyester strapping can rupture easily on the corner of a load due to its low cross directional strength, especially under high tension.

Ensuring that you adequately secure cargo without damaging the export cargo container or goods’ being shipped is of the utmost importance. Redback strapping stays tight during transit and is ideal for securing heavy or irregular shaped loads inside of containers and rail cars, as well as onto vessels, barges and flat rack containers.

For more information please visit our site at www.redbackindustries.com

Polyester cord strapping, otherwise known as safety strapping, outperforms steel banding and provides optimum protection against product damage and serious personal injury. There have been numerous accidents over the last few years and with the cost of steel strapping continuing to rise it is time to replace steel banding with a superior and safer alternative.

Benefits of Cord Strapping Compared to Steel Strapping

  • No sharp edges
  • Can be cut while under tension without the possibility of recoil injury
  • withstand additional shock loading (18% more elasticity than steel) without failure
  • Ease of disposal
  • Safer work environment
  • Ability to re-tension and reuse strap
  • Polyester strap shrinks or expands with loads
  • High retention memory – stays strong and tight on product
  • Will not rust or damage product
  • The plastic strapping system is lighter than the metal strapping system.

Redback Industries has built a strong reputation in the load containment industry for providing quality strapping solutions and services at competitive prices.  For more information please visit our site at www.redbackindustries.com

Redback Industries offers a complete line of strapping and strap buckles for the lumber industry. Our strapping equipment is designed to withstand the harsh environment of the lumber industry while providing a safe, cost efficient alternative to steel strapping.

Composite strapping and woven cord strapping are ideal for the lumber industry. The combination of high tensile, elongation and excellent recovery makes for a superior replacement product for steel strapping. While steel strapping has been used for securing lumber loads for nearly a hundred years, technological advancement has paved the way for strapping with high strength polyester cord strapping. High-tenacity woven polyester strapping coupled with a maximum joint-efficiency strapping buckle, is specifically designed for load securement. This system is tested and proven to dramatically reduce the potential for employee injury and product damage.  Woven polyester strapping is quickly replacing steel banding as an industry standard.

In the lumber industry where loads are commonly dumped off of trucks, Redback Industries cord strapping eliminates the shock break, keeping products contained and providing a clean, safer working environment. From the forest to the construction site lumber must be transported and shipped multiple times. It is imperative that you keep your lumber safe, secure and damage free from traveling on trucks and rail cars. Redback Industries offers a full line of strapping and strapping tools ideal for lumber yards.

For more information please visit our site at www.redbackindustries.com

Friday, 01 May 2015 10:40

Why Use Woven Cord Strapping

Redback Industries specializes in Woven Cord Strapping, a safe and superior alternative to steel banding. Woven polyester strapping outperforms steel banding and provides optimum protection against serious injury to employees and customers. It absorbs impacts and load shifting that would normally break steel banding, and it will not lash-back dangerously when cut.

Woven cord strapping is widely used by lumber, military, industrial and mining industries. Steel strapping is hazardous and is being replaced by this easy to use and safe alternative. Steel strapping is a serious source of personnel accidents. Unlike steel strapping, woven cord strapping does not rust or damage goods and has minimal lash-back when cut.

Strapping undergoes many stresses during transit. Shock is a common source of strap failure and Redback’s cord strapping stays tight on loads and can absorb impacts and load shifting that would normally break steel banding or damage valuable product. In addition, Redback Industries woven cord straps are environmentally friendly and can be reused.

The cost of steel banding continues to rise and has seriously outpaced increases in plastic and cord strapping.  Since the beginning of the year, the cost of steel strapping is up approximately 38%, compared to 8% for cord strapping. Cord strapping is a safe, superior and economical alternative to the danger and high cost associated with steel banding.  For more information about converting from steel to cord strapping, please visit our site at www.redbackindustries.com

Good news for all the truck drivers out there; trucking continues to be the dominant mode of freight transportation, and an integral part of the U.S economy according to the 2012 edition of ATA American Trucking Trends by American Trucking Associations.

Overall in 2011; “trucking moved $603.9 billion in freight – more than 80 percent of all freight transportation revenue. That freight weighed 9.2 billion tons – 67 percent of all freight by weight.”  We don’t have to tell you that is a lot of freight!

The distances travelled by truckers are almost astronomical too, with “Class 6-8 trucks travelling 131.2 billion miles in 2010, and all trucks regardless of size travelling 397.8 billion miles.”

So how do truck drivers keep their freight safe and secure while driving these incredible distances? By using Redback Industries composite strapping and galvanised buckles, of course. With maximum impact resistance and high joint strength, truckers know that their freight will remain firmly solid and steadfast for their journey. Woven polyester strapping won’t rust or damage the goods either. Using Redback Industries POWERFLEX composite strapping may even lighten the truckers’ loads, being a quarter of the weight of steel banding.

There’s really no reason for trucking companies not to get in touch with Redback Industries, if you haven’t already, and experience the benefits which woven polyester strapping can bring to your business.

At Redback Industries, we are committed to keeping you up to date on the latest cargo securement news: The Montana Department of Transportation is gearing up for approximately 300 oversized loads bearing oil modules, on interstates 90 and 15. The plan will eliminate the need to use state highway 12, which is generally favored by large oil importers.

Breakbulk.com reports:

The 205 original [Kearl] modules… were reduced in size to meet interstate highway weight and size requirements after Idaho denied use of Highway 12, a route that did not have overpasses…. All shipments are bound for Imperial/Exxon’s Kearl Oil Sands Project in northeastern Alberta.

The loads will enter the state of Montana on Interstate 90 in Mineral County and exit the state of Montana on Interstate 15 at the Port of Sweet Grass in Toole County, according to a MDOT statement. Some of the loads will originate from the river ports in Pasco, Wash., and Lewiston, Idaho, where they were broken down into smaller pieces. Some of these loads –about 30 downsized loads from Lewiston–have already been trucked into Montana.

The smaller, conventional loads are able to move during daylight hours, while the larger loads on hydraulic trailers must move after 8 p.m. The largest of the modules measure 25 feet wide, nearly 12 feet high and 123 feet long.

For irregular sized loads such as these, we recommend cargo strapping like our Powerlash Cargo Restraint Systems.  Powerlash Cargo Restraint is a modular system, using high-tenacity polyester webbing, high joint efficiency no-sew fasteners and a removable tensioning mechanism. Using various combinations of webbing, hooks and strap buckles, Powerlash works well for securing heavy or irregular shaped loads inside of containers and rail cars, as well as onto vessels, barges and flat rack containers.

For irregular-sized loads and cargo securement, contact Redback Industries today for a quote or consultation, or visit our website at www.redback.com.

The trade show crate, strapped tight with Redback strapping, is on its way to the Breakbulk Transportation Conference in New Orleans.  Visit us in Booth 907 to see our full line of polyester cord strapping, cord lashing, manual and pneumatic banding tools, as well as buckles, hooks and accessories for securing project cargo and export packaging.  Also on display will be our new synthetic round lifting slings for vertical, choker and basket hitches.  And, be sure to check our low profile, hands free inflator for our line of poly woven air dunnage bags.  For more information on the Breakbulk Americas Transportation Conference or our line of cargo securement options, visit www.redback.com.

At the end of September 2011, The Cargo Incident Notification System (CINS) network will finish an extremely important pilot project.  Established in November 2010 by container operators that include Evergreen, Hapag-Lloyd, Maersk Line and other companies, the CINS embarked on a project that aimed to reduce accidents caused by improper cargo securement, incorrect weight declaration, and improper packaging.

What did the CINS pilot project involve?

The operators worked in tandem and shared information regarding company cargo accidents, incidents and near accidents.  This information was then compiled in a pilot CINS database.  Using this information, trends were identified concerning high risk load securement and other areas; in turn, this data provided guidance on how to minimize such risks in the future.  Advice how to ensure that cargo will arrive at its destination intact – and general information regarding how to ensure safer container shipping was also given.

How will this pilot project affect the future of the industry?

In the future, the CINS network believes that this database will also show just how widespread certain unsafe practices are in the cargo securement and shipping industry.  In turn, this important information will lead to the proper load securement and shipping legislation changes.  In addition, this information will also result in better load containment and cargo packing training in containers.

Moreover, besides these improvements, the founders of this initiative also hope to improve the quality of cargo delivery and of how individuals in the maritime industry communicate and fulfil obligations.

Redback Industries is committed to bringing you the most up-to-date information on cargo securement regulations.  We have built a strong reputation in the cargo securement industry for providing quality strapping solutions and services at competitive prices.  Redback Industries provides composite cord strappingwoven polyester strapping, and cargo lashing for load securement.  In addition, check out our strap buckles as well as strapping tools and accessories for maximum efficiency and durability.  Find out how we can help you with load restraint at www.redback.com

Page 1 of 5