Redback Industries carries a complete range of strapping tools and strapping tensioners for securing cargo. Redback’s line of PROSERIES strapping tools is noted for their precision manufacturing, durability, and safety. Industrial strength strapping tools and accessories are economical and require minimal maintenance.

Woven Polyester Cord and Composite Cord Strapping are a safer, more affordable, and easier to carry alternative to steel strapping. Polyester strapping maintains tension over time and absorbs impacts that would normally break steel strapping.

Now, with your first order of 12 coils, get a FREE ¾” windlass strapping tensioner.  Offer valid through June 15.  Redback offers demonstrations and training, corporate pricing programs, free tool and tool repair programs, as well as local inventory and delivery.

Trust the protection of your cargo to poly strapping and strapping tools from Redback Industries. For more information please visit our site at www.redback.com

Published in Cord Strapping

From June 7th to 9th, 2011, the Commercial Vehicle Safety Alliance (CVSA), held their annual three day commercial vehicle safety enforcement and education campaign.  More specifically, almost 8000 qualified inspectors examined 70,712 trucks at 2550 locations throughout North America.

Called Roadcheck 2011, this campaign revealed that both the motor coach and commercial motor carrier industries continue to improve with respect to safety issues – including cargo securement.  However, the CVSA’s Executive Director Stephen A. Keppler stated that there was still room for improvement.   Keppler went on to say the following:

“Events that focus on ensuring vehicles and drivers are complying with the law, like Roadcheck and all roadside inspections, draw critical attention to out-of-service rates and are shown to also impact crash reductions.”

About Roadcheck 2011

During this year’s Roadcheck event, about sixteen buses or trucks were inspected per minute in this seventy-two hour intensive campaign. More specifically, truck and bus drivers were asked to display their record of duty status, commercial driver’s license, and medical examiner’s certificate at truck inspection locations.

Along with thoroughly examining for proper load securement – including safe cargo straps and cargo tiedowns – the tires, brakes, lights and other bus and truck safety components were carefully scrutinized by the qualified inspectors.

While this three day safety blitz was definitely an intensive process, it is important to note that roadside inspections take place everyday throughout North America.  In fact, in 2010 alone, just under four million trucks and buses were examined for issues that include cargo strap safety on this continent.

Redback Industries has built a strong reputation in the load containment industry for providing quality strapping solutions and services at competititve prices.  Redback Industries provides composite strapping, woven polyester strapping and cargo lashing for cargo securement.  Find out how we can help you with load restraint at www.redback.com.

Published in Federal Regulations

The U.S. Coast Guard (USCG) published in the Federal Register a Notice of request for comments on methods for securing cargo in transport vehicles and freight containers, in order to determine whether a standardized approval or certification process or improvised performance criteria for flexible strapping securing systems is needed. 75 Fed. Reg. 1070-71.

Currently, no certification or qualification standard exists under Federal law for blocking, bracing, or for the use of strapping systems for securing cargo. Under current federal regulation, cargo, including hazardous materials, transported above-ground (either in vehicles, rail, or on vessels) must be secured to prevent shifting of the cargo or damage to the container during transport. 49 CFR Part 176.76. However, the specific method by which the cargo is secured is unregulated. Oftentimes, flexible strapping is used even though it may not always properly secure cargo in transit. The USCG solicits comments while considering whether to implement a standardized certification or approval process for cargo securing systems.

Redback Industries specializes in Woven Polyester cord straps and Composite Cord Strapping Systems which are superior to and safer than steel banding.  Redback strapping is ideal for securing heavy loads, bundled loads and irregular shaped objects. With the cost of steel banding continuing to rise there is no better time to convert to textile banding.

For more information please visit our site at www.redback.com

Published in Federal Regulations
Saturday, 02 May 2015 04:45

Containerization and Load Securing

Containerization originated in early coal mining regions in England and Germany in the late 1700s. By the 1830s, railroads were carrying containers that could be transferred to other modes of transport. Originally used for shipping coal on and off barges, “loose boxes” were used to containerize coal. The early 1900s saw the adoption of closed container boxes designed for movement between road and rail.  Containerization continued to evolve and toward the end of World War II, the United States Army used specialized containers to speed the loading and unloading of transport ships. The first vessels purpose-built to carry containers began operation in 1951 and in the U.S. ships began carrying containers between Seattle and Alaska.

Today, approximately 90% of non-bulk cargo worldwide moves by containers stacked on transport ships. There are many different materials available to stabilize and secure cargo in containers now used in all modes of transportation. Conventional load securing methods and materials such as steel banding have been around for decades. Due to technological advancement there are new load securing options available such as polyester strapping and lashing.  All types of tensioned strapping, particularly steel, need to be handled carefully because of potential injury.

Woven cord strapping outperforms steel banding and provides optimum protection against serious injury to employees and customers. Redback’s POWERWEB absorbs impacts and load shifting that would normally break steel banding, and it will not lash-back dangerously when cut.  For more information please visit our site at www.redback.com

Published in uncategorized

According to the 2006 federal Large Truck Crash Causation Study (LTCCS), there are a number of different factors that contribute to truck accidents. However, while there are a number of different factors involved in these types of accidents, the LTCCS notes that the following factors contribute to the majority of truck accidents:

Truck Cargo Shift – when an improperly secured cargo load on a truck shifts, serious accidents can occur.

Truck Driver Training – while many truckers receive proper training, there are cases where inadequate driver experience and training plays a major role in trucks accidents.

Truck Manufacture– if there is a mechanical fault within a truck, an accident can occur.

Traffic Signalling and/or Highway Conditions – both faulty signalling and inadequate highway infrastructure can contribute to truck accidents.

Weather Conditions – unfavourable conditions that include blizzards, rain storms, freezing rain, fog and other poor environmental conditions can contribute to truck accidents

Secure Your Truck Load Properly

While many factors do contribute to truck accidents, one way to avoid such accidents and/or to minimize damage if involved with an unavoidable accident is to ensure that a truck’s pallet loads are properly secured.  One excellent way to promote safety is to make use of a steel banding alternative that will ensure the cargo securement of these bundles.

For instance, Redback Industries specialises in non-metal straps that are impact resistant and maintain both their strength and tension over time.  Ideal for both irregular and heavy loads, the woven polyester cord strap, the composite cordstrap, and lashing systems all provide excellent support.

To conclude then, in order to minimize the damage caused in truck accidents or to avoid these types of accidents altogether, it is vital that bundles on trucks are properly secured on pallets with the proper straps.  To find out how Redback Industries can help your business with load securement, visit www.redbackindustries.com, or call us at 1.866.455.1345.

Published in Cargo Securement

Steel strapping is available in a variety of widths and thicknesses as well as variations in the grade of steel. Steel is used where minimal stretch is desired. Surface finishes for steel strap include: paint, paint and wax, bluing or zinc and wax. The wax is used to better transmit the tension around the bundle and for use with certain types of tensioners. Common applications include steel coils, bundles of metal, baling wire, bricks and pavers, and roll end-binding.

Unfortunately, there have been numerous accidents over the last few years and with the cost of steel strapping continuing to rise, it is time to replace steel banding with a superior and safer alternative.

Polypropylene strap (oriented or tensilized), also known as poly strapping,  is an economical material designed for light to medium duty unitizing, palletizing and bundling. It is available in various widths, thicknesses, and polymer variations (e.g., copolymers). Some polypropylene is embossed or printed.

This product offers high elongation at break but tends to have irrecoverable dead stretch with constant stress. What is not generally known to end users is that polypropylene strapping will lose about 50% of the applied tension within one hour, and that this tension loss is accelerated with increases in ambient temperature, consequently although suitable for packs with a degree of stored energy that will take up any relaxation that occurs in the strap, unacceptable strap slackness may occur after time if used on product that is ‘Solid’ such as bricks or concrete. Furthermore, polypropylene strapping is susceptible to UV degradation and can quickly degrade if left outside exposed to the elements.

Oriented or tensilized polyester and nylon strapping are stronger than polypropylene and are used as an alternative to steel strapping in the some industries.  Polyester provides excellent retained tension on rigid loads.  Its excellent recovery properties can help a load absorb impact without strap breakage, however polyester strapping can rupture easily on the corner of a load due to its low cross directional strength, especially under high tension.

Ensuring that you adequately secure cargo without damaging the export cargo container or goods’ being shipped is of the utmost importance. Redback strapping stays tight during transit and is ideal for securing heavy or irregular shaped loads inside of containers and rail cars, as well as onto vessels, barges and flat rack containers.

For more information please visit our site at www.redbackindustries.com

Published in Cargo Securement

Steel strapping is available in a variety of widths and thicknesses as well as variations in the grade of steel. Steel is used where minimal stretch is desired. Surface finishes for steel strap include: paint, paint and wax, bluing or zinc and wax. The wax is used to better transmit the tension around the bundle and for use with certain types of tensioners. Common applications include steel coils, bundles of metal, baling wire, bricks and pavers, and roll end-binding.

Unfortunately, there have been numerous accidents over the last few years and with the cost of steel strapping continuing to rise, it is time to replace steel banding with a superior and safer alternative.

Polypropylene strap (oriented or tensilized), also known as poly strapping,  is an economical material designed for light to medium duty unitizing, palletizing and bundling. It is available in various widths, thicknesses, and polymer variations (e.g., copolymers). Some polypropylene is embossed or printed.

This product offers high elongation at break but tends to have irrecoverable dead stretch with constant stress. What is not generally known to end users is that polypropylene strapping will lose about 50% of the applied tension within one hour, and that this tension loss is accelerated with increases in ambient temperature, consequently although suitable for packs with a degree of stored energy that will take up any relaxation that occurs in the strap, unacceptable strap slackness may occur after time if used on product that is ‘Solid’ such as bricks or concrete. Furthermore, polypropylene strapping is susceptible to UV degradation and can quickly degrade if left outside exposed to the elements.

Oriented or tensilized polyester and nylon strapping are stronger than polypropylene and are used as an alternative to steel strapping in the some industries.  Polyester provides excellent retained tension on rigid loads.  Its excellent recovery properties can help a load absorb impact without strap breakage, however polyester strapping can rupture easily on the corner of a load due to its low cross directional strength, especially under high tension.

Ensuring that you adequately secure cargo without damaging the export cargo container or goods’ being shipped is of the utmost importance. Redback strapping stays tight during transit and is ideal for securing heavy or irregular shaped loads inside of containers and rail cars, as well as onto vessels, barges and flat rack containers.

For more information please visit our site at www.redbackindustries.com

Published in Cord Strapping

Steel strapping is available in a variety of widths and thicknesses as well as variations in the grade of steel. Steel is used where minimal stretch is desired. Surface finishes for steel strap include: paint, paint and wax, bluing or zinc and wax. The wax is used to better transmit the tension around the bundle and for use with certain types of tensioners. Common applications include steel coils, bundles of metal, baling wire, bricks and pavers, and roll end-binding.

Unfortunately, there have been numerous accidents over the last few years and with the cost of steel strapping continuing to rise, it is time to replace steel banding with a superior and safer alternative.

Polypropylene strap (oriented or tensilized), also known as poly strapping,  is an economical material designed for light to medium duty unitizing, palletizing and bundling. It is available in various widths, thicknesses, and polymer variations (e.g., copolymers). Some polypropylene is embossed or printed.

This product offers high elongation at break but tends to have irrecoverable dead stretch with constant stress. What is not generally known to end users is that polypropylene strapping will lose about 50% of the applied tension within one hour, and that this tension loss is accelerated with increases in ambient temperature, consequently although suitable for packs with a degree of stored energy that will take up any relaxation that occurs in the strap, unacceptable strap slackness may occur after time if used on product that is ‘Solid’ such as bricks or concrete. Furthermore, polypropylene strapping is susceptible to UV degradation and can quickly degrade if left outside exposed to the elements.

Oriented or tensilized polyester and nylon strapping are stronger than polypropylene and are used as an alternative to steel strapping in the some industries.  Polyester provides excellent retained tension on rigid loads.  Its excellent recovery properties can help a load absorb impact without strap breakage, however polyester strapping can rupture easily on the corner of a load due to its low cross directional strength, especially under high tension.

Ensuring that you adequately secure cargo without damaging the export cargo container or goods’ being shipped is of the utmost importance. Redback strapping stays tight during transit and is ideal for securing heavy or irregular shaped loads inside of containers and rail cars, as well as onto vessels, barges and flat rack containers.

For more information please visit our site at www.redbackindustries.com

Published in Woven Cord Strapping
Saturday, 02 May 2015 05:55

Why Use Woven Cord Strapping

Redback Industries specializes in Woven Cord Strapping, a safe and superior alternative to steel banding. Woven polyester strapping outperforms steel banding and provides optimum protection against serious injury to employees and customers. It absorbs impacts and load shifting that would normally break steel banding, and it will not lash-back dangerously when cut.

Woven cord strapping is widely used by lumber, military, industrial and mining industries. Steel strapping is hazardous and is being replaced by this easy to use and safe alternative. Steel strapping is a serious source of personnel accidents. Unlike steel strapping, woven cord strapping does not rust or damage goods and has minimal lash-back when cut.

Strapping undergoes many stresses during transit. Shock is a common source of strap failure and Redback’s cord strapping stays tight on loads and can absorb impacts and load shifting that would normally break steel banding or damage valuable product. In addition, Redback Industries woven cord straps are environmentally friendly and can be reused.

The cost of steel banding continues to rise and has seriously outpaced increases in plastic and cord strapping.  Since the beginning of the year, the cost of steel strapping is up approximately 38%, compared to 8% for cord strapping. Cord strapping is a safe, superior and economical alternative to the danger and high cost associated with steel banding.  For more information about converting from steel to cord strapping, please visit our site at www.redbackindustries.com

Published in Woven Cord Strapping
Saturday, 02 May 2015 05:57

Montana DOT Prepares for Oversized Loads

At Redback Industries, we are committed to keeping you up to date on the latest cargo securement news: The Montana Department of Transportation is gearing up for approximately 300 oversized loads bearing oil modules, on interstates 90 and 15. The plan will eliminate the need to use state highway 12, which is generally favored by large oil importers.

Breakbulk.com reports:

The 205 original [Kearl] modules… were reduced in size to meet interstate highway weight and size requirements after Idaho denied use of Highway 12, a route that did not have overpasses…. All shipments are bound for Imperial/Exxon’s Kearl Oil Sands Project in northeastern Alberta.

The loads will enter the state of Montana on Interstate 90 in Mineral County and exit the state of Montana on Interstate 15 at the Port of Sweet Grass in Toole County, according to a MDOT statement. Some of the loads will originate from the river ports in Pasco, Wash., and Lewiston, Idaho, where they were broken down into smaller pieces. Some of these loads –about 30 downsized loads from Lewiston–have already been trucked into Montana.

The smaller, conventional loads are able to move during daylight hours, while the larger loads on hydraulic trailers must move after 8 p.m. The largest of the modules measure 25 feet wide, nearly 12 feet high and 123 feet long.

For irregular sized loads such as these, we recommend cargo strapping like our Powerlash Cargo Restraint Systems.  Powerlash Cargo Restraint is a modular system, using high-tenacity polyester webbing, high joint efficiency no-sew fasteners and a removable tensioning mechanism. Using various combinations of webbing, hooks and strap buckles, Powerlash works well for securing heavy or irregular shaped loads inside of containers and rail cars, as well as onto vessels, barges and flat rack containers.

For irregular-sized loads and cargo securement, contact Redback Industries today for a quote or consultation, or visit our website at www.redback.com.

Published in Cargo Securement
Page 2 of 3