Polyester cord strapping, otherwise known as safety strapping, outperforms steel banding and provides optimum protection against product damage and serious personal injury. There have been numerous accidents over the last few years and with the cost of steel strapping continuing to rise it is time to replace steel banding with a superior and safer alternative.

Benefits of Cord Strapping Compared to Steel Strapping

  • No sharp edges
  • Can be cut while under tension without the possibility of recoil injury
  • withstand additional shock loading (18% more elasticity than steel) without failure
  • Ease of disposal
  • Safer work environment
  • Ability to re-tension and reuse strap
  • Polyester strap shrinks or expands with loads
  • High retention memory – stays strong and tight on product
  • Will not rust or damage product
  • The plastic strapping system is lighter than the metal strapping system.

Redback Industries has built a strong reputation in the load containment industry for providing quality strapping solutions and services at competitive prices.  For more information please visit our site at www.redbackindustries.com

Polyester cord strapping, otherwise known as safety strapping, outperforms steel banding and provides optimum protection against product damage and serious personal injury. There have been numerous accidents over the last few years and with the cost of steel strapping continuing to rise it is time to replace steel banding with a superior and safer alternative.

Benefits of Cord Strapping Compared to Steel Strapping

  • No sharp edges
  • Can be cut while under tension without the possibility of recoil injury
  • withstand additional shock loading (18% more elasticity than steel) without failure
  • Ease of disposal
  • Safer work environment
  • Ability to re-tension and reuse strap
  • Polyester strap shrinks or expands with loads
  • High retention memory – stays strong and tight on product
  • Will not rust or damage product
  • The plastic strapping system is lighter than the metal strapping system.

Redback Industries has built a strong reputation in the load containment industry for providing quality strapping solutions and services at competitive prices.  For more information please visit our site at www.redbackindustries.com

Published in Cord Strapping

The cost of steel banding is up 40% this year and up more than 50% since November.  Now is the time to switch from Steel to Polyester Cord Strapping.  Woven Polyester Cord and Composite Cord Strapping are safe and superior alternatives to steel banding.  They can absorb impacts that would normally break steel and they will not lash back dangerously when cut.  In addition, Polyester Cord Strapping maintains tension over time and will not rust or damage loads.  Now, with your first order of 12 coils, get a FREE ¾” windlass strapping tensioner.  Offer valid through the end of May.  Redback offers demonstrations and training, corporate pricing programs, free tool and tool repair programs, as well as local inventory and delivery.  Call Redback today for details 1.866.455.1345.

Steel strapping is available in a variety of widths and thicknesses as well as variations in the grade of steel. Steel is used where minimal stretch is desired. Surface finishes for steel strap include: paint, paint and wax, bluing or zinc and wax. The wax is used to better transmit the tension around the bundle and for use with certain types of tensioners. Common applications include steel coils, bundles of metal, baling wire, bricks and pavers, and roll end-binding.

Unfortunately, there have been numerous accidents over the last few years and with the cost of steel strapping continuing to rise, it is time to replace steel banding with a superior and safer alternative.

Polypropylene strap (oriented or tensilized), also known as poly strapping,  is an economical material designed for light to medium duty unitizing, palletizing and bundling. It is available in various widths, thicknesses, and polymer variations (e.g., copolymers). Some polypropylene is embossed or printed.

This product offers high elongation at break but tends to have irrecoverable dead stretch with constant stress. What is not generally known to end users is that polypropylene strapping will lose about 50% of the applied tension within one hour, and that this tension loss is accelerated with increases in ambient temperature, consequently although suitable for packs with a degree of stored energy that will take up any relaxation that occurs in the strap, unacceptable strap slackness may occur after time if used on product that is ‘Solid’ such as bricks or concrete. Furthermore, polypropylene strapping is susceptible to UV degradation and can quickly degrade if left outside exposed to the elements.

Oriented or tensilized polyester and nylon strapping are stronger than polypropylene and are used as an alternative to steel strapping in the some industries.  Polyester provides excellent retained tension on rigid loads.  Its excellent recovery properties can help a load absorb impact without strap breakage, however polyester strapping can rupture easily on the corner of a load due to its low cross directional strength, especially under high tension.

Ensuring that you adequately secure cargo without damaging the export cargo container or goods’ being shipped is of the utmost importance. Redback strapping stays tight during transit and is ideal for securing heavy or irregular shaped loads inside of containers and rail cars, as well as onto vessels, barges and flat rack containers.

For more information please visit our site at www.redbackindustries.com

Steel strapping is available in a variety of widths and thicknesses as well as variations in the grade of steel. Steel is used where minimal stretch is desired. Surface finishes for steel strap include: paint, paint and wax, bluing or zinc and wax. The wax is used to better transmit the tension around the bundle and for use with certain types of tensioners. Common applications include steel coils, bundles of metal, baling wire, bricks and pavers, and roll end-binding.

Unfortunately, there have been numerous accidents over the last few years and with the cost of steel strapping continuing to rise, it is time to replace steel banding with a superior and safer alternative.

Polypropylene strap (oriented or tensilized), also known as poly strapping,  is an economical material designed for light to medium duty unitizing, palletizing and bundling. It is available in various widths, thicknesses, and polymer variations (e.g., copolymers). Some polypropylene is embossed or printed.

This product offers high elongation at break but tends to have irrecoverable dead stretch with constant stress. What is not generally known to end users is that polypropylene strapping will lose about 50% of the applied tension within one hour, and that this tension loss is accelerated with increases in ambient temperature, consequently although suitable for packs with a degree of stored energy that will take up any relaxation that occurs in the strap, unacceptable strap slackness may occur after time if used on product that is ‘Solid’ such as bricks or concrete. Furthermore, polypropylene strapping is susceptible to UV degradation and can quickly degrade if left outside exposed to the elements.

Oriented or tensilized polyester and nylon strapping are stronger than polypropylene and are used as an alternative to steel strapping in the some industries.  Polyester provides excellent retained tension on rigid loads.  Its excellent recovery properties can help a load absorb impact without strap breakage, however polyester strapping can rupture easily on the corner of a load due to its low cross directional strength, especially under high tension.

Ensuring that you adequately secure cargo without damaging the export cargo container or goods’ being shipped is of the utmost importance. Redback strapping stays tight during transit and is ideal for securing heavy or irregular shaped loads inside of containers and rail cars, as well as onto vessels, barges and flat rack containers.

For more information please visit our site at www.redbackindustries.com

Published in Cargo Securement

Steel strapping is available in a variety of widths and thicknesses as well as variations in the grade of steel. Steel is used where minimal stretch is desired. Surface finishes for steel strap include: paint, paint and wax, bluing or zinc and wax. The wax is used to better transmit the tension around the bundle and for use with certain types of tensioners. Common applications include steel coils, bundles of metal, baling wire, bricks and pavers, and roll end-binding.

Unfortunately, there have been numerous accidents over the last few years and with the cost of steel strapping continuing to rise, it is time to replace steel banding with a superior and safer alternative.

Polypropylene strap (oriented or tensilized), also known as poly strapping,  is an economical material designed for light to medium duty unitizing, palletizing and bundling. It is available in various widths, thicknesses, and polymer variations (e.g., copolymers). Some polypropylene is embossed or printed.

This product offers high elongation at break but tends to have irrecoverable dead stretch with constant stress. What is not generally known to end users is that polypropylene strapping will lose about 50% of the applied tension within one hour, and that this tension loss is accelerated with increases in ambient temperature, consequently although suitable for packs with a degree of stored energy that will take up any relaxation that occurs in the strap, unacceptable strap slackness may occur after time if used on product that is ‘Solid’ such as bricks or concrete. Furthermore, polypropylene strapping is susceptible to UV degradation and can quickly degrade if left outside exposed to the elements.

Oriented or tensilized polyester and nylon strapping are stronger than polypropylene and are used as an alternative to steel strapping in the some industries.  Polyester provides excellent retained tension on rigid loads.  Its excellent recovery properties can help a load absorb impact without strap breakage, however polyester strapping can rupture easily on the corner of a load due to its low cross directional strength, especially under high tension.

Ensuring that you adequately secure cargo without damaging the export cargo container or goods’ being shipped is of the utmost importance. Redback strapping stays tight during transit and is ideal for securing heavy or irregular shaped loads inside of containers and rail cars, as well as onto vessels, barges and flat rack containers.

For more information please visit our site at www.redbackindustries.com

Published in Cord Strapping

Steel strapping is available in a variety of widths and thicknesses as well as variations in the grade of steel. Steel is used where minimal stretch is desired. Surface finishes for steel strap include: paint, paint and wax, bluing or zinc and wax. The wax is used to better transmit the tension around the bundle and for use with certain types of tensioners. Common applications include steel coils, bundles of metal, baling wire, bricks and pavers, and roll end-binding.

Unfortunately, there have been numerous accidents over the last few years and with the cost of steel strapping continuing to rise, it is time to replace steel banding with a superior and safer alternative.

Polypropylene strap (oriented or tensilized), also known as poly strapping,  is an economical material designed for light to medium duty unitizing, palletizing and bundling. It is available in various widths, thicknesses, and polymer variations (e.g., copolymers). Some polypropylene is embossed or printed.

This product offers high elongation at break but tends to have irrecoverable dead stretch with constant stress. What is not generally known to end users is that polypropylene strapping will lose about 50% of the applied tension within one hour, and that this tension loss is accelerated with increases in ambient temperature, consequently although suitable for packs with a degree of stored energy that will take up any relaxation that occurs in the strap, unacceptable strap slackness may occur after time if used on product that is ‘Solid’ such as bricks or concrete. Furthermore, polypropylene strapping is susceptible to UV degradation and can quickly degrade if left outside exposed to the elements.

Oriented or tensilized polyester and nylon strapping are stronger than polypropylene and are used as an alternative to steel strapping in the some industries.  Polyester provides excellent retained tension on rigid loads.  Its excellent recovery properties can help a load absorb impact without strap breakage, however polyester strapping can rupture easily on the corner of a load due to its low cross directional strength, especially under high tension.

Ensuring that you adequately secure cargo without damaging the export cargo container or goods’ being shipped is of the utmost importance. Redback strapping stays tight during transit and is ideal for securing heavy or irregular shaped loads inside of containers and rail cars, as well as onto vessels, barges and flat rack containers.

For more information please visit our site at www.redbackindustries.com

Published in Woven Cord Strapping

Nylon strap has the greatest specific strength of the three plastics, the cost outweighs the strength benefits. In the past nylon strap used to be very popular, but over time polyester has replaced almost all of its use. One application that still uses this type of strap is cold room applications, because it does not creep as much as the other types of plastic.

Corded and woven strapping is available in several constructions, generally in polyester and rayon. Because this system uses a buckle for a joint, corded and woven strapping can have larger system strength than steel banding.   Corded polyester strapping also has higher elongation and memory than other strapping systems, which makes it ideal for sea and rail shipments. Because corded and woven polyester is light and soft, it is also a safer alternative to steel banding and is more environmentally friendly as it is generally reusable.

There are specialized types available for specific applications. For instance, in cold climates a strap bonded in hot melt glue can be used because it is weather-proof.

Composite strapping has filaments embedded in it and is often referred to as “synthetic steel”.  It has the highest joint efficiency when used with a buckle is very abrasion resistant.

For cargo securement that offers maximum impact resistance, high joint strength and maintains tension over time, contact Redback Industries. We will help determine which strapping solution is right for you – contact Redback Industries at 1.866.455.1345 or visit our site at www.redbackindustries.com

Nylon strap has the greatest specific strength of the three plastics, the cost outweighs the strength benefits. In the past nylon strap used to be very popular, but over time polyester has replaced almost all of its use. One application that still uses this type of strap is cold room applications, because it does not creep as much as the other types of plastic.

Corded and woven strapping is available in several constructions, generally in polyester and rayon. Because this system uses a buckle for a joint, corded and woven strapping can have larger system strength than steel banding.   Corded polyester strapping also has higher elongation and memory than other strapping systems, which makes it ideal for sea and rail shipments. Because corded and woven polyester is light and soft, it is also a safer alternative to steel banding and is more environmentally friendly as it is generally reusable.

There are specialized types available for specific applications. For instance, in cold climates a strap bonded in hot melt glue can be used because it is weather-proof.

Composite strapping has filaments embedded in it and is often referred to as “synthetic steel”.  It has the highest joint efficiency when used with a buckle is very abrasion resistant.

For cargo securement that offers maximum impact resistance, high joint strength and maintains tension over time, contact Redback Industries. We will help determine which strapping solution is right for you – contact Redback Industries at 1.866.455.1345 or visit our site at www.redbackindustries.com

Published in Cargo Securement

Nylon strap has the greatest specific strength of the three plastics, the cost outweighs the strength benefits. In the past nylon strap used to be very popular, but over time polyester has replaced almost all of its use. One application that still uses this type of strap is cold room applications, because it does not creep as much as the other types of plastic.

Corded and woven strapping is available in several constructions, generally in polyester and rayon. Because this system uses a buckle for a joint, corded and woven strapping can have larger system strength than steel banding.   Corded polyester strapping also has higher elongation and memory than other strapping systems, which makes it ideal for sea and rail shipments. Because corded and woven polyester is light and soft, it is also a safer alternative to steel banding and is more environmentally friendly as it is generally reusable.

There are specialized types available for specific applications. For instance, in cold climates a strap bonded in hot melt glue can be used because it is weather-proof.

Composite strapping has filaments embedded in it and is often referred to as “synthetic steel”.  It has the highest joint efficiency when used with a buckle is very abrasion resistant.

For cargo securement that offers maximum impact resistance, high joint strength and maintains tension over time, contact Redback Industries. We will help determine which strapping solution is right for you – contact Redback Industries at 1.866.455.1345 or visit our site at www.redbackindustries.com

Published in Cord Strapping
Page 1 of 2